
Light is one of the most important growth factors in greenhouse horticulture. At present, the amount of light in a greenhouse is usually calculated on the basis of measurements taken outside the greenhouse using a solarimeter, via a fixed conversion formula. However, this approach does not take sufficient account of differences in greenhouse roofing, soiling, the use of shading screens or seasonal effects.
In this project, we investigated whether measuring with PAR sensors inside the greenhouse could be a more accurate alternative. And what did we find? The traditional calculations often significantly overestimate the actual amount of light reaching the crop. Depending on the location, crop and time of year, this difference ranged from 9 per cent to as much as over 30 per cent. This is due, amongst other things, to variations in light transmission through the greenhouse roof, the use of shading screens and fluctuations in the proportion of PAR in sunlight throughout the year.
Measurements taken in the greenhouse therefore provide a more realistic picture of the light that plants actually receive. However, correct installation is crucial. That is why we developed and tested a practical installation protocol for tomatoes, cucumbers, lettuce and peppers. Two sensors on either side of a greenhouse post, or a single sensor on a mobile post, have proved to be a robust solution, provided they are correctly levelled and properly calibrated to the light conditions.
We also examined whether it is possible to control the system effectively based on those PAR measurements. We found that real-time control can pose a challenge due to the shading effects in the greenhouse. Simulations show that PAR-based lighting can result in a slightly higher realised DLI. This difference is limited; PAR-controlled lighting appears to be feasible. There are also opportunities for irrigation: control based on PAR measurements can lead to fewer watering cycles, without any negative impact on the crop.
The conclusion? PAR measurements in the greenhouse offer clear added value for crop monitoring and present opportunities for more precise control. With further practical validation, this could represent a first important step towards more autonomous and data-driven greenhouse horticulture.
You can find the PAR sensor installation guide here.


